Advertisement
Operation
Selecting the Recording Port for Setting
Selecting the Playback Port
14 (E)
The unique functions added to the MAV-555 when using this board are
described below.
Refer to the MAV-555 Operation Manual for details of MAV-555 setup and
operation.
The method of selecting the recording port for setting depends on the
operating mode of the BKMA-520SS, as follows (see page 2):
For Sony Super Motion Mode
Press the R1 PORT SELECT button so that the R1 button is lit.
For 3-In/1-Out Mode
Press the R1, R2 or P1/R3 PORT SELECT button according to the desired
recording port, so that the corresponding button is lit.
When a playback port is desired, press the P2 PORT SELECT button so
that the P2 button is lit.
Operation is the same when the BKMA-520SS is operated in either the
Sony Super Motion or 3-In/1-Out mode.
Advertisement
