Localcustomdashboard In The Clone File; Edit The T&C For Hotspot - Philips BFL2114/12 Series Professional Installation Manual

12.4 LocalCustomDashboard in the clone file

After you have set your settings correctly you can clone TV to USB to add your local custom dashboard.
The folder name used in the root of the USB device containing the clone data:
TPM181HE_CloneData/MasterCloneData/
Go to the local custom dashboard via .../MasterCloneData/LocalCustomDashboard/
In the [Professional Settings], when [Dashboard][Select Dashboard] is set to [Custom Dashboard
(Browser Based)] you can set [Source] to [Local]. In this case the TV shall load the custom dashboard
from the flash memory if available.
By default, the TV shall not have any pages in the flash when coming out of factory.
If in the [Professional Settings], [Dashboard][Fallback] is set to [Off], then the TV shall fall back to the
default dashboard if there is no network connection to the server.
If it is set to [On], the LocalCDB will be loaded when Server cannot be reached.
If in the [Professional Settings], [Dashboard][Select Dashboard][Custom Dashboard (Browser
Based)][Source] is set to [Server] and the TV is unable to connect to the configured server then it shall
fall back to the custom dashboard stored locally, [Dashboard][Fallback] is set to [On] along with valid
fallback files.
You need to make sure that the files in the /LocalCustomDashboard/ folder are HTML5 compliant along
with the JAPIT WIXP plugin.
12.5 Edit the T&C for hotspot
For the hotspot functionality, you can enable a T&C to be shown or not. You can edit the text as you
want using CMND or by editing following file in your clone:
TPM181HE_CloneData/MasterCloneData/TVSettings/
CustomTermsAndCondition.json
You only need to Change the 'MessageTitle' content and the 'MessageBody' content according your
needs. You can also add an extra language by duplicating the message part in the json file as in below
example.
By default, only the English text is there. You can add a language by changing and/or adding the
message. The language tag ('eng' for English in below example) is following the ISO639-2/T and ISO-
639-2/B standards.
- 137 -