Philips BFL2114/12 Series Professional Installation Manual page 76

o [Headphone/Bathroom
Vol]: When [On], the volume level of
the Headphone/Bathroom speaker
will be fixed to the Switch on Setting
o [Headphone Detection]: When the
Headphone Detection is set to [On]
and the headphone is connected then
TV speakers
automatically. When [Off], the user
has to manually mute the TV speakers
o Navigate to the [Sound] [TV Placement]
menu
o You will see [On the Wall] and [On a
stand]. Depending on your selection you
will optimize the sound acoustics of the
TV for the placement of your TV
o Navigate to the [Sound] [Advanced]
menu
o You will see below items:
o [Surround Mode]: Select the sound
effect for the internal TV, you can
choose [Stereo] or [DTS TruSurround]
Note: You can only change this is the
[Sound Style] is set to [Personal] in the
switch on settings
o [Auto
TruVolume] or [Night mode] if you
want to enable to level out sudden
volume differences or [Off] if you want
to disable
o [Clear Sound]: Select if you want to
enable Clear Sound to improve the
sound for speech [On] or [Off] if you
want to disable
o [Audio Out Format]: Set the audio out
signal of the TV to fit with the sound
capabilities of the connected Home
Theatre
(uncompressed)],
[Multichannel (bypass)] or [Dolby
Digital Plus]
o [Audio Out Leveling]: Select the level
out of the volume of the Home Theatre
System and the TV when switching
over from one to the other to [More],
[Medium] or [Less]
o [Audio Out Delay]: Switch the delay if
a sound delay is set on the Home
Theatre System to [On] or [Off]
- 75 -
Spk
shall be muted
volume]: Select
System to [Stereo
[Multichannel],
Fixed
[DTS