Philips BFL2114/12 Series Professional Installation Manual page 67

o [Watch TV RC Key Mapping]: You can
map the "Watch TV" button on the RC to
different sources and to different apps
installed on the TV
Note: The
enabling/disabling of features/sources and
installed apps
o [RC5 Keys Mapping]: You can map an RC5
command to an existing support RC key
When you open this action you will see a
new screen and you will be able to [+ New
RC Mapping].
If you open this menu you will be able to:
•
•
•
•
o Navigate to the [Input control] [Multi Remote
Control] menu
o This function allows that up to 14 televisions can
be installed in a room whereas each TV will react
to its own RC
o You will see a list of options ('Off', the 4 color keys
and all digits)
o The TV will only react on the RC that is
programmed linked to your selection
Note: The TV will still respond to the master RC
o Once the TV is set to some value other than [Off],
also the RC should be programmed to the same
selection to still work with the TV
o How to program the RC:
o Press and hold both the menu and the color
button or digit button on the RC for about five
seconds (You should not point the RC to the
receiver on the TV)
o To see the status of the remote control, while
pointing at the TV, press and hold the "Mute"
- 66 -
list will be depending
add the RC key by setting the
[System] to [00] or [03]
You can choose the [Code], this
needs to be a digit
You can select the [Map to
Function] to any existing RC
function
You can [Delete RC Key x]
againYou can map the "Watch
TV" button on the RC to different
sources and to different apps
installed on the TV
on