Edimax AR7167WnA User Manual page 50

Static IP Address
IP Subnet Mask
Gateway
NAT
Dynamic Route
TCP MTU Option
IGMP Porxy
IPv6 Options

selected, please set the IP Address, Subnet Mask and
Gateway obtained from your ISP.
Enter the IP Address assigned by your ISP. Only if you
chose Static above.
Enter the Subnet Mask assigned by your ISP. Only if you
chose Static above.
Enter the Gateway assigned by your ISP. Only if you
chose Static above.
NAT (Network Address Translation), an Internet standard
that enables a local-area network (LAN) to use one set of
IP addresses for internal traffic and a second set of
addresses for external traffic. When NAT is enabled, the
router will help to make all necessary IP address
translations for the PC connected to the router to access
the Internet.
Dynamic routing allows routing tables in routers to
change as the possible routes change. This router
supports RIP1, RIP2-B and RIP2-M protocols for
dynamic routing. After the RIP protocol is selected,
please choose the RIP direction from "None", "Both", "IN
Only" or "OUT Only".
MTU (Maximum Transmission Unit) determine the
maximum size of each packet in any transmission within
the network. Please specify the MTU range from 100 to
1500 bytes or 0 byte as the default value.
Enable or disable IGMP proxy feature.
42