LG Minibeam Nano PV150G Owner's Manual page 122

- Leave an adequate open area (30 cm or more) around the projector.
• Do not install the projector in a hot or humid environment.
- Only install the projector in a place of moderate temperature and low humidity.
• Do not install the projector in a place where it can attract dust.
- There is a risk of fire.
• Never open any cover on the projector. There is a high risk of electric shock.
• This projector is manufactured using high-precision technology. You may,
however, see tiny black dots and/or bright colored dots that continuously appear
on the projector screen. This is a normal result of the manufacturing process and
does not indicate a malfunction.
• The remote control may not work in an environment where a lamp equipped with
electronic ballasts or a three-wavelength fluorescent lamp is installed. Replace
the lamp with an international standard lamp for the remote control to work
normally.
PREPARATION
25