- The power cord may be
damaged, resulting in fire or
electric shock.
•
Do not place the projector on an
unstable or vibrating surface such as
a wobbly shelf or a slope.
- It may fall and cause injury.
•
Be careful not to tip the projector over
when connecting external devices to
the projector.
- This may cause personal injury or
damage to the projector.
Power
WARNING
•
DISCONNECTING THE DEVICE
FROM THE MAIN POWER
- The Power plug is the
disconnecting device. In case of
an emergency, the Power Plug
must remain readily accessible.
•
The grounding wire should be con-
nected. (Except for devices which are
not grounded.)
- Ensure that you connect the
ground ing cable to avoid electric
shock. If it is not possible to ground
the unit, have a qualified electrician
install a separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods or gas pipes.
SAFETY PRECAUTIONS
•
The power plug should be inserted
fully into the power outlet.
- An unstable connection may
cause a fire.
•
Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
•
Never touch the power plug with wet
hands.
- This may result in electric shock.
•
Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
•
Keep the AC adapter, power plug,
and the used power outlet clean from
dust or foreign materials building up.
- This may result in fire.
•
If there is any smoke or a burning
smell from the projector or AC
adapter, stop using the product
immediately. Disconnect the power
cord from the power outlet, and then
contact the customer service center.
- This may result in fire.
•
To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
5