Handlebar Switches - Yamaha XT250 2008 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
"RESET" button together for at
least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set the
1 hours.
3. Push the "SELECT" button, and
the minute digits will start flashing.
2
4. Push the "RESET" button to set
the minutes.
3
5. Push the "SELECT" button and
then release it to start the clock.
4
5
6
7
8
9

Handlebar switches

Left
1
2
3
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
4-4
EAU12347 Right
1
2
1. Engine stop switch "
2. Start switch " "
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
/ "
EAU12400
/ "
" for the high
EAU12460
/ "
". When re-