Appendix C: Installing The Tcp/Ip Protocol - Linksys BEFCMUH4 Quick Manual

Cable gateway with 4-port switch/usb and 802.11b wireless-ready

Hide thumbs Also See for BEFCMUH4:

Table of Contents

Linksys BEFCMUH4 Cable Gatewayr + 802.11b Wireless-Ready

Appendix C: Installing the TCP/IP

Protocol

Follow these instructions to install the TCP/IP protocol on one of your PCs

only after a network card has been successfully installed inside the PC. These

instructions are for Windows 95, Windows 98, and Windows Me. For TCP/IP

setup under Windows NT, 2000, and XP, see your Windows documentation.

1. Click the Start button. Choose Settings and then Control Panel.

2. Double-click on the Network icon to bring up your Network window. Select

the Configuration tab.

Figure D-1

3. Click the Add button.

Table of Contents