Linksys BEFCMUH4 Quick Manual page 26

D. Enter the IP address of the PC or network device that you want the port
server to go to. For example, if the web server's Ethernet adapter IP
address is 192.168.100.2, you would enter 2 in the field provided. The 0 is
to disable port service.
When you have completed the configuration, click the Apply button.
7. I can't get the Internet game, server, or application to work.
If you are having difficulties getting any Internet game, server, or application to
function properly, consider exposing one PC to the Internet using DeMilitarized
Zone (DMZ) hosting. This option is available when an application requires too
many ports or when you are not sure which port services to use. Make sure
you disable all the forwarding entries if you want to successfully use DMZ
hosting, since forwarding has priority over DMZ hosting. (In other words, data
that enters the Gateway will be checked first by the forwarding settings. If the
port number that the data enters from does not have port forwarding, then the
Gateway will send the data to whichever PC or network device you set for
DMZ hosting.) Follow these steps to set DMZ hosting:
A. Access the Gateway's web-based utility by going to http://192.168.100.1
or the IP address of the Gateway. Go to the Advanced => Forwarding
tab.
B. Disable or remove the entries you have entered for forwarding. Keep this
information in case you want to use it at a later time.
C. Click the DMZ Host tab.
D. Enter the Ethernet adapter's IP address of the computer you want
exposed to the Internet. This will bypass the NAT firewall for that computer.
Once completed with the configuration, click the Apply button.
8. I forgot my password, or the password prompt always appears when
saving settings to the Gateway.
Reset the Gateway to factory default by pressing the Reset button for 5
seconds and then releasing it. If you are still getting prompted for a password
when saving settings, then perform the following steps:
A. Access Gateway's web interface by going to http://192.168.100.1 or the IP
address of the Gateway. Enter the default password admin, and then go
25
Linksys BEFCMUH4 Cable Gatewayr + 802.11b Wireless-Ready