Configuring A Spa Ip Phone For Voicemail Service - Linksys SPA400 Administration And Configuration Manual

SPA400 Internet Telephony Gateway with 4 FXO Ports
Administration and Configuration Guide v1.0

Configuring a SPA IP Phone for Voicemail Service

Each valid SPA IP Phone extension configured in the SPA9000 may be configured
for voicemail service. The SPA IP Phone configuration page (Figure 6) can be
accessed by either clicking on the PBX Status link in the upper right location of the
SPA9000 configuration utility or by entering the SPA IP Phone IP address into the
browser.
From the SPA IP Phone configuration utility, click the Ext 1 tab. The voicemail setting
is entered in the Mailbox ID field in the following format:
<line#><User ID>
Where <line#> refers to the SPA9000 Line (1–4) of the SPA400 configuration and
<User ID> must match the setting entered in the SPA400 Voicemail Users menu.
From the example in Figure 5 and Figure 6, the setting is as follows:
The IP address reflected in the Voice Mail Server field on the SPA IP Phone Ext 1
page (Figure 6) is correctly configured as the IP address of the SPA9000. The
SPA9000 acts as a proxy to the SPA400 voicemail server.
Click the Submit All Changes button on the SPA IP Phone configuration utility. The
SPA IP Phone will reboot. The SP IP Phone has now been configured to access the
voicemail service.
LVS Voicemail Users may refer to the SPA IP Phone Voicemail Quick Reference
Card for details on using the voicemail service.
SPA400 Internet Telephony Gateway with 4 FXO Ports – Administration and Configuration Guide v1.0
© 2006 Linksys
Call Feature Settings: Mailbox ID = 1100
9