Set Up The Paper Cassette And Load Paper - Canon ImageCLASS MF3240 Series Starter Manual

Set Up the Paper Cassette and Load Paper

1
Insert the output tray into the front slot on the
machine.
B
NOTE
To load Legal-size paper, pull the blue tab (A) and extend the paper cassette (B) as far as it will go. Keep the rear paper guide
to LGL-size mark.
7
2
Pull out the paper cassette completely.
CAUTION
Pull the paper cassette straight/forward. Pulling it at an
angle may damage the paper sensing lever inside the
machine.
A
3
B
A
A
Attach the cassette extension to the paper
cassette. The slots (A) are keyed and must be
inserted at a 90° angle. Once inserted, fold the
extension (B).
5
Fan the paper stack and even the edges.
4
A
B
Pinch and slide the rear paper guide (A) to match
the size of paper (B).
NOTE
Confirm that the rear paper guide is fitted in the paper
size slit correctly.
6
A
Load the paper into the paper cassette with the
print side down. Make sure the paper stack sits
below the hooks (A) on the rear paper guide.
8