Lcd Messages - Canon FAXPHONE L75 User Manual

LCD Messages

The following messages are displayed in the LCD when the machine is performing a
task, or when it encounters an error. The error code appears in the ACTIVITY REPORT
(1 p. 11-3).
Message
AUTO REDIAL
BUSY/NO SIGNAL
CHANGE CARTRIDGE
13-8
Troubleshooting
Error Code Cause
— The machine is waiting to
redial the other party's
fax number because the
line was busy or the
other party did not
answer when you tried to
send the document.
#018 The fax/telephone
number you dialed is
busy.
The fax number dialed
was incorrect.
The other party's fax
machine is not working.
The other party is not
using a G3 fax machine.
The telephone line type
setting on your machine
is incorrect.
The receiving fax
machine did not answer
within 55 seconds (after
all automatic redialing
attempts).
— The toner inside the
cartridge may be
unevenly distributed.
Action
Wait for the machine to
automatically redial the fax
number (1 p. 7-9).
Try sending the document
at a later time.
Check the fax number and
dial again.
Contact the other party and
have them check their fax
machine.
Contact the other party to
check that they are using a
G3 fax machine.
Set your machine for your
telephone line type
(1 p. 3-8).
Contact the other party and
have them check their fax
machine. You can try to
send the document using
manual sending via the
handset (1 p. 7-6). For an
overseas call, add pauses
to the registered number
(1 p. 9-2).
Redistribute the inside the
cartridge (1 p. 12-6). If the
message remains, replace
the cartridge (1 p. 12-6).
Chapter 13