Follow this procedure to install the cartridge in the machine:
1
Make sure the machine is plugged in.
2
Lift the latch and open the front cover.
c
Do not try to open the front cover
without lifting the latch since this
may damage your machine.
3
Remove the new FX3 cartridge from
its protective bag.
• Save the protective bag in case you
need to repack the cartridge at a later
date.
4
Gently rock the cartridge from
side to side a few times to distribute
the toner evenly inside it.
• Poor print quality may result if the toner
is unequally distributed.
2-14
Setting Up
Chapter 2