Table of Contents
Advertisement
Appendix
Removing the
stand
1
Hold the camera upside down
and adjust the angle of the
stand as shown.
2
Insert a thin, non-metallic
object into the groove on the
bottom of the camera body,
and then remove the stand by
rotating its base as shown.
30
Note:
R When mounting a tripod to the
camera, do not mount a tripod
with a screw length of 6.5 mm
or more. This may damage the
camera.
Attaching the stand
Insert a thin, non-metallic object
into the groove on the bottom of
the camera body, and then attach
the stand by rotating its base as
shown.
Advertisement
Table of Contents
