Table of Contents
Advertisement
F4
5
Press [F4] (ORIGNAL SIZE) to select the size of the original ©
OK
press [OK].
Each time you press
becomes highlighted.
The Frame Erase Width setting menu appears.
NOTE
• You can set the Hole Punch Erase mode only for the original sizes shown on the
LCD display.
•
The machine automatically selects the copy paper size according to the original
size you set. <AUTO PAPER> is displayed; however, you can also select the paper
size manually.
F3
6
Press [F3] (–) or [F4] (+) to set the desired hole punch erase
width (3 mm to 20 mm) © press [OK].
F4
You can also use the numeric keys to enter the hole punch erase width, and
OK
(Clear) to clear the value.
If you enter a value outside the setting range, an error tone sounds. Enter a value
within the setting range.
The selected mode is set, and the Copy Basic Features screen appears.
NOTE
The default setting is '18 mm'.
F4
(ORIGNAL SIZE), the next or previous menu option
C
Frame Erase
3-15
3
Advertisement
Table of Contents
