Table of Contents
Advertisement
7
1
Stop
F3
Stop
F2
F3
F4
Interrupt
1-8
Flow of Copy Operations
NOTE
If there is a current job, the machine scans the original, and waits to print it. Printing
starts when the current job is complete.
If you want to stop, interrupt, or copy another original during a
copy job, follow the instruction below.
G If you want to stop a copy job:
❑
Press [Stop].
❑
Press [F3] (YES).
G If you want to cancel a copy job in the standby mode:
❑
Press [Stop].
❑
Press [F2] (M) or [F3] (L) to select the copy job you want to cancel © press
[F4] (CANCEL).
NOTE
• After pressing
(Stop), several copies may continue to print out.
•
You can also cancel a copy job from the System Monitor screen. (See "Using the
System Monitor Screen," on p. 1-17.)
G If you want to interrupt a copy job:
❑
To interrupt a copy job when you need to make priority copies, press [Interrupt].
For instructions on interrupting a copy job, see "Interrupt Mode," on p. 1-20.
The message <ABLE TO PERFORM INTERRUPT JOB> appears on the LCD
display.
Advertisement
Table of Contents
