Table of Contents
Advertisement
1
COPY
F2
2
2
F3
3
F4
2-6
Paper Selection
Press [COPY].
lights.
COPY
Place your original © press [F2] (PAPER SELECT).
NOTE
•
The default setting is 'AUTO PAPER'.
• If DRAWER ELIGIBLTY is set to '01 OFF' in Common Settings (from the Additional
Functions menu), <AUTO PAPER> is not displayed. (See Chapter 4, "Selecting
and Storing Settings," in the Reference Guide.)
Press [F3] (M) or [F4] (L) to select the desired paper size.
NOTE
• The paper sizes shown on the LCD display vary depending on which paper sizes
are loaded in the paper drawers.
•
indicates that the paper is set vertically, and
horizontally.
• To select the stack bypass for the current job or for a reserved job, press
(STACK BYPASS).
G If you want to use the stack bypass:
❑
Load the desired paper size and type in the stack bypass.
The Paper Size setting menu appears.
indicates that the paper is set
F2
Advertisement
Table of Contents
