Table of Contents
Advertisement
2
Adjust the slide guides to fit the size of your originals.
IMPORTANT
•
Do not add or remove originals while they are being scanned.
•
Do not place objects in the original output area. Blocking the paper delivery slot
may damage the originals.
•
When scanning is complete, remove the originals from the original output tray to
avoid paper jams.
NOTE
• The scanned originals are output face down to the original output tray.
•
You can place different size originals (i.e., LTR
LTR
) together in one group in the feeder when you set the Different Size
Originals mode. (See "Different Size Originals," on p. 3-22.)
Original Output Tray
and 11" x 17"
, STMT
Placing Originals
1
and
1-15
Advertisement
Table of Contents
