Xts/Xts Pro; Sound Mode; Controlling Your Tv With The Supplied Remote Control - LG HR902TA Owner's Manual

XTS/XTS pro

Each time you press XTS Pro the setting changes in
the following order.
XTS ON → NORMAL → XTS-PRO ON
XTS ON
When playing the movie with the weak bass sound
relatively to the general music, it enforces the
sense of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
NORMAL
XTS-Pro and XTS mode turn off
XTS-PRO ON
The unique sound quality of the LG Technology
creates the optimum sound for you to play the
perfect playback of the original sound and to feel
the living sound source.

Sound Mode

You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the program you want to listen to. (2 ch. sound only)
Press SOUND button repeatedly.
1. PCM
→
BYPASS PROLOGIC
→ →
MATRIX HALL 1
→
BYPASS...
2. Dolby Digital
→
BYPASS PROLOGIC
→ →
MATRIX BYPASS...
Notes:
Initial sound mode is BYPASS.
When recording a TV broadcast or external source
to the internal hard disk drive (HDD) or disc, the
sound recordings are encoded with Dolby Digital.
18
→ →
MOVIE MUSIC
→ →
HALL 2 THEATER
→ →
MOVIE MUSIC
Controlling Your TV with the
Supplied Remote Control
You can control the sound level, input source, and
power switch of your LG/GoldStar TV with the
supplied remote.
1. While holding down TV POWER button,
press PR v or V.
2. Release TV POWER button.
You can control your TV using the buttons below.
By pressing You can
POWER Turn the TV on or off.
INPUT Switch the TV's input source
between the TV and other input
sources.
PR v/V Scans up or down through
memorized channels.
VOL +/– Adjust the volume of the TV.
Note:
When you replace the batteries of the remote, you
may have reset the remote control.
TV Control
Buttons