Hookup and Settings
Rear Panel
a b c
h
i
j
a IN (FROM ANT.)
Connect the aerial to this terminal.
b AV OUT (VIDEO / AUDIO OUT (Left/Right))
Connect to a TV with video/audio inputs.
c AV IN 3 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
d EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
e HDMI OUTPUT (Type A)
HDMI output providing a high quality interface for
digital audio and video.
f Cooling fan
g AC Power Cord
Plug into the power source.
Connecting to the Aerial
Remove the aerial cable plug from your TV set and
insert it into the IN (FROM ANT.) socket at the back of
the recorder. Plug one end of the aerial cable into the
TV socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the OUT (TO TV) jack on the HDD/DVD
Recorder Receiver to the aerial input jack on the TV
using the 75-ohm Coaxial Cable (R). The OUT (TO TV)
jack passes the signal through from the IN (FROM
ANT.) jack.
10
d
e
k
l
h OUT (TO TV)
i OPTICAL IN Connector
j COMPONENT/PROGRESSIVE SCAN VIDEO
k SYSTEM
l EURO AV 1 AUDIO/VIDEO
f
Passes the signal from the AERIAL to your
TV/monitor
Connect an optical output of Digital Device.
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
Connect the SPEAKER SYSTEM at the Active
Speaker.
Connect to a TV with SCART jack.
Aerial
SCART INPUT
ANTENNA
INPUT
R (Not supplied)
Rear of the HDD/DVD Recorder Receiver
g
Rear of TV
VIDEO
AUDIO INPUT
INPUT
L
R