Samsung CLP-770ND Service Manual page 79

Message
S: There is no corresponding paper in the
Paper mismatch Tray3 tray3.
M:
Load [A4] [Plain]
Continue ⊙ Cancel X
S: There is no corresponding paper in the
Paper mismatch MP MP tray.
M:
Load [A4] [Plain]
Continue ⊙ Cancel X
S: Paper is empty in tray1.
Paper Empty in tray1
T:
Paper is empty
in tray1.
Load paper
S: The tray1 cassette is not installed
Tray1 cassette Out properly.
T:
Tray1 cassette is
pulled out.
Insert it properly
S: Paper is empty in MP tray.
Paper Empty in MP
T:
Paper is empty
in MP tray.
Load paper
S: The tray2 is not installed properly.
Tray2 Not Installed
T:
Tray2 is not installed
S: Paper is empty in tray2.
Paper Empty in tray2
T:
Paper is empty
in tray2.
Load paper
S: The tray2 cassette is not installed
Tray2 cassette Out properly.
T:
Tray2 cassette is
pulled out. Insert it
properly
Service Manual
Alignment & Troubleshooting
Description
4-26
Suggested Solution
1. Check the CN10 connector on HVPS.
2. Check the shape of the paper size switch in cassette.
Load the paper in MP tray.
1. Check the CN5 connector on HVPS.
2. Reconnect the CN1,2 connector. And check the flat
cable.
3. Replace the paper empty sensor or actuator.
1. Check the CN4 connector on HVPS.
2. Reconnect the CN1,2 connector. And check the flat
cable.
Load the paper in MP tray.
Reinstall the Tray2 unit.
Load the paper in Tray2
Reinstall the Tray2 cassette.
Samsung Electronics