Sony PFV-HD50A Operating Manual page 15

5 Cover plates
Remove the corresponding plates to install the optional
boards.
6 y (signal ground) terminal
For signal ground. Connect to a ground wire as
required.
7 STATUS OUT connector (25-pin)
Outputs the following error statuses of the PFV-
HD50A.
• The inserted optional board does not function
correctly.
• The temperature inside the unit has risen to a
specified level.
• Trouble occurs with the output voltage of power unit
A or B.
• The ventilation fans have stopped rotating.
• The power is turned off.
• A voltage overload has occurred.
8 ~AC IN B connector
To supply power to power unit B, connect to an AC
power supply using one of the following power cords:
Model available in North America:
DK-2401 AC Power Cord
Model available in the United Kingdom:
Part No. 1-590-910-11
9 ~AC IN A connector
To supply power to power unit A, connect to an AC
power supply using one of the following power cords:
Model available in North America:
DK-2401 AC Power Cord
Model available in the United Kingdom:
Part No. 1-590-910-11
!º ROUTING SWITCHER connectors (BNC type)
Unused
5 (GB)