Agilent Technologies 83620A Service Manual page 475

Rear Panel Disassembly and Reassembly
Tools Required
9/16 in. Socket
-10 orx Screwdriver
-15 orx Screwdriver
5.5 mm Nut Driver
5/16 in. Open End Wrench
14 mm Open End Wrench
7 mm Nut Driver
#1 x 3 1/8 in. Pozidriv Screwdriver
#2 x 4 in. Pozidriv Screwdriver
Coax Extractor ool{Submin D Connector
Description and Procedure
Some steps in this procedure may not apply to all option con gurations. If a
particular step does not apply, continue with the next appropriate step.
o disassemble the rear panel and associated assemblies, follow this procedure
in the order given.
o reassemble the rear panel and associated assemblies, follow this procedure in
the reverse order.
Cable routing may a ect instrument performance. Refer to
CAUTION
Figure 7-1 for a diagram of the instrument cable routing.
Refer to the owchart in Figure 7-17 to determine the necessary disassembly
steps for a given assembly.
7-26 Disassembly and Replacement Procedures
Rear Panel
All manuals and user guides at all-guides.com
HP 8360