All manuals and user guides at all-guides.com
Utilities
1. Front Panel Emulation
Description
his utility simulates an 8360 series instrument front panel keyboard in an
instrument with a delete front panel option installed.
Procedure
o access the front panel emulation utility, select the front panel emulation
program in the test menu.
he front panel emulation program cannot run front panel functions that use a
power meter or printer. hese functions cause the 8360 series instrument to act
as a controller, which con
icts with the computer as the controller on the bus.
Use a substitute front panel to run these functions, or use the tests provided
with this software.
When using the front panel emulation program, enter the letter directly above
^
the caret (
) to activate the function or key. Note that the keys are case
sensitive (\L" means \ALC" and \l" means \LOCAL"). See able 5-4 for a
detailed listing of hardkey designations.
For numeric entry, two dierent terminator keys are combined on one hardkey.
he actual terminator depends on the active mode of the synthesizer.
For example: When pulse width is the active entry,
frequency span is the active entry,
Softkeys are designated by
to the ve softkey positions below the display. o activate the softkey, press
the function key on the keyboard that corresponds to the number X indicated
by menukey.
HP 8360
enters 10 kHz.
10
k
5
5
, where X is 1 through 5 and corresponds
menukey X
enters 10 ms. When
10
k
5
5
Automated Tests 5-19