Table of Contents
Advertisement
Building In
These hobs can be inserted in a built-in kitchen unit whose
depth is between 550 and 600 mm. The hobs dimensions
are shown in Fig. 4.
Cut Out Size
The dimensions of the cut-out are given in the diagram.
Fitting the Hob into the worktop
F
Carry out the building in of the hob as follows:
• put the seals supplied with the hob on the edges of
the cut out, as shown in the diagram, taking care
that the seals meet without overlapping;
• place the hob in the cut out, taking care that it is
centred;
• fix the hob with the relevant fixing clamps and screws,
as shown in the diagram. When the screws have been
tightened, the excess seal can be removed.
The edge of the hob forms a double seal which prevents
the ingress of liquids.
10
All manuals and user guides at all-guides.com
Fig. 4
Rectangular cut-out size for hob
Dimensions are given in mm.
FO 2038
FO 2348
FO 0199
560
100
150 min
Fig. 5
Fig. 6
Seal
Fig. 7
Advertisement
Table of Contents
