Something Wrong With Your Cooker - Cannon HENLEY Professional 600 10688 Use And Installation Instructions

Before contacting your Service Centre or Installer, check the problem guide
below, there may be nothing wrong with your cooker.
PROBLEM
Ignition does not work.
Hotplate burner.
Burner ports
SOMETHING WRONG
WITH YOUR COOKER
CHECK
If all burners fail to ignite:
Check that sparks appear at the burners; a clicking
noise should be heard.
If not...
Check that the electricity supply is turned on.
If the electricity supply has failed, the hotplate
burners can be lit by a match.
If only one burner fails to ignite:
Check that the burner is dry and that spillage of food
or cleaning fluid remains are not affecting the ignitor
Ignitor
or burner ports.
Clean away any debris with a dry nylon brush such as
an old toothbrush. If a wire wool pad has been used
for cleaning around the burner ensure the ignitor is
free from any stray strands. Any water on the burner
should be dried with a cloth or kitchen towel.
Make sure that all the burner parts are correctly
seated.
21