About The "Infolithium" Battery Pack - Sony Handycam DCR-PC330 Operation Manual

Notes on using the "Memory Stick PRO"
• The maximum memory capacity of a
"Memory Stick" that can be used on your
camcorder is 1 GB (512 MB for a "Memory
Stick PRO Duo").
• This unit does not support high speed data
transfer.
Notes on image data compatibility
• Image data files recorded on a "Memory
Stick" by your camcorder conform to the
Design Rule for Camera File Systems
universal standard established by the JEITA
(Japan Electronics and Information
Technology Industries Association).
• On your camcorder, you cannot play back still
images recorded on other device (DCR-
TRV890E/TRV900/TRV900E or DSC-D700/
D770) that does not conform to the universal
standard. (These models are not sold in some
regions.)
• If you cannot use a "Memory Stick" that has
been used with other device, format it with
your camcorder (p. 66). Note that formatting
erases all information on the "Memory Stick."
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded
with other device.
• "Memory Stick,"
Memory Stick" are trademarks of Sony
Corporation.
• "Memory Stick Duo" and "
are trademarks of Sony Corporation.
• "Memory Stick PRO" and "
are trademarks of Sony Corporation.
• "MagicGate" and "
trademarks of Sony Corporation.
• All other product names mentioned herein
may be the trademarks or registered
trademarks of their respective companies.
Furthermore, "™" and "®" are not mentioned
in each case in this manual.
and "MagicGate
"
"
" are
About the
"InfoLITHIUM"
battery pack
This unit is compatible with the
"InfoLITHIUM" battery pack (M series). Your
camcorder operates only with the
"InfoLITHIUM" battery pack.
"InfoLITHIUM" M series battery packs have
the mark.
TM
SERIES
What is the "InfoLITHIUM" battery
pack?
The "InfoLITHIUM" battery pack is a lithium-
ion battery pack that has functions for
communicating information related to operating
conditions between your camcorder and an
optional AC Adaptor/charger.
The "InfoLITHIUM" battery pack calculates
the power consumption according to the
operating conditions of your camcorder, and
displays the remaining battery time in minutes.
With an AC Adaptor/charger (optional), the
remaining battery time and charging time
appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in
an ambient temperature of between 10°C to
30°C (50°F to 86°F) until the CHG (charge)
lamp turns off. If you charge the battery pack
outside of this temperature range, you may not
be able to charge it efficiently.
• After charging is complete, either disconnect
the cable from the DC IN jack on your
camcorder or remove the battery pack.
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10°C (50°F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for
a longer time.
Additional Information
,continued
119