Advertisement
4. Replacing the batteries
If the battery power becomes low, the "
1. Remove the battery lid by lifting it in the direction of the arrow and lifting it out.
2. Remove the old batteries, and then install two new batteries.
■ The data on today's and yesterday's temperature and humidity are erased, and the settings of the clock,
alarm time and WBGT warning value are reset to the initial settings. (Set these values again.)
Battery lid
■ The batteries included with the unit are for verifying operation, and so may have a shorter life than
expected.
Dispose of used batteries in compliance with local rules and regulations.
5. Installation
Wall-mounting Use
- When mounting on a wall, use the wall-mounting
hole to secure it to the wall with a screw.
- A screw is not included in the package. You need to
purchase a screw from a home center.
Desktop Use
Pull out the stand attached to the back of the unit for desktop use.
Find a stable place free of direct sunlight and air conditionings to install.
" icon appears. Replace the batteries with new ones.
used: Two AAA batteries
Install the batteries with their
polarities aligned correctly.
Hook hole
(Wall-mounting hole)
6
Stand
Advertisement
