Advertisement
2-2. Setting the clock
● While in the clock display mode, press and hold the SET button for three seconds to enter the clock
setting mode.
1. "24H" starts flashing. Use the [
(MAX or MIN) button to set the 24H or 12H time
format.
2. Press the SET button to flash the hours. Use the
[
] (MAX) button to increases the value or the
▲ 最高
[
] (MIN) button to decreases the value for
▼ 最低
setting the hours.
3. Press the SET button again to flash the minutes.
Use the [
] (MAX) button to increases the
▲ 最高
value or the [
▼ 最低
value for setting the minutes.
4. Press the SET button again to complete the clock setting.
■ Press and hold the [
■ If no buttons are pressed for about one minute, the clock currently displayed is fixed.
2-3. Setting the alarm time and turning it on or off
● While in the current temperature and humidity display mode or in the clock display mode, press and
hold the MODE button for three seconds to display the alarm time.
1. Press and hold the SET button for three seconds cause the [アラーム] and
hour display to start flashing.
Press the SET button again to cause the [アラーム] and minute display to
start flashing. Set the alarm time following the same procedure as for setting
the clock.
2. Press the SET button once again to complete the alarm time setting.
To return to the current temperature, humidity and time display, press the
MODE button. (If no buttons are pressed for one minute, the unit sets the
alarm time to the time currently displayed and returns to the current
temperature and humidity display or the clock display.)
* While in the alarm time display, press the SET button. The "
up to indicate that the alarm has been turned on. (The "
when the clock display is resumed.) When the SET button is pressed a
second time, the "
turned off.
■ If the screen is switched to the WBGT or absolute humidity display while the alarm is turned on, the
"
" icon goes out but the alarm-on state remains.
■ The alarm sounds for about one minute. To stop the alarm from sounding, press any button.
] or [
▲ 最高
] (MIN) button to decreases the
] or [
] (MAX or MIN) button to quickly change the value.
▲ 最高
▼ 最低
" icon goes out to indicate that the alarm has been
]
▼ 最低
" icon remains lit
4
" icon lights
Advertisement
