All manuals and user guides at all-guides.com
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST on page 11. Note: Some small parts may have been pre-
assembled. If a part is not in the hardware kit, check to see if it has been preassembled.
M6 Washer (23)
M10 Locknut (24)
M10 Washer (22)
M6 x 25mm
M6 x 60mm Screw (19)
M5 x 15mm
Screw (20)
Screw (21)
M10 x 45mm Bolt (18)
M10 x 55mm Bolt (16)
M10 x 256mm Rod (17)
5