Part Identification Chart - WEIDER CLUB 190 T User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has
been preattached.
M10 x 137mm Bolt (36)
M10 x 63mm Bolt (32)
M8 x 55mm Bolt (18)
M8 x 43mm Bolt (39)
M8 x 42mm Carriage Bolt (37)
M8 Locknut (17)
M10 Locknut (33)
M6 x 38mm Screw (30)
M6 x 16mm Screw (29)
5
M6 Washer (26)
M8 Washer (16)
M10 Washer (34)