PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: If a small part is not
in the hardware kit, check to see if it has been preattached.
M10 Washer (55)
M8 Washer (49)
M6 Washer (32)
M10 Locknut (42)
M8 Locknut (36)
All manuals and user guides at all-guides.com
M4 x 19mm
M5 x 19mm
Screw (54)
Screw (52)
M10 x 85mm Bolt (44)
M10 x 90mm Carriage Bolt (43)
M10 x 90mm Bolt (45)
M10 x 77mm Bolt Set (47)
5
M6 x 20mm
Screw (53)
M6 x 40mm Screw (51)
M8 x 70mm Bolt (46)
M6 x 80mm Screw (48)