Table of Contents
Advertisement
ASSEMBLY
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
1.
To make assembly easier, read the infor-
mation above and use the PART IDENTI-
FICATION CHART on page 5.
Attach the Left Frame (1) to the Seat Frame
(3) with four M10 x 55mm Bolts (16), four M10
Washers (22), and four M10 Locknuts (24). Do
not tighten the Locknuts yet.
Attach the Right Frame (2) to the Seat
Frame (3) in the same way.
Tighten the Backrest Knob (15) into the Seat
Frame (3).
2. Attach the Foot Plate (10) to the Left and Right
Frames (1, 2) with four M5 x 15mm Screws
(21).
See step 1. Tighten the M10 Locknuts (24).
All manuals and user guides at all-guides.com
1
2
6
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the following tools:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
3
15
2
24
24
22
2
1
10
21
21
1
22
16
Advertisement
Table of Contents
