Table of Contents
Advertisement
Enabling Echo Reduction
1.
Use Dante Controller software to route the incoming far end audio signal to the Echo Reduction Reference In channel
on the MXA910.
2.
In the MXA910 web application, enter Configuration> AUTOMIX
3.
Enable echo reduction by selecting a strength setting in the pull-down menu. Soft, medium, and hard settings provide
far-end attenuation and apply gain to the reference channel to ensure proper gating.Note: the off-attenuation setting
changes to -56 dB, and the Leave last microphone on setting is set to OFF when echo reduction is enabled.
Using Command Strings
This device receives logic commands over the network. Many parameters controlled through Designer can be controlled using
a third-party control system, using the appropriate command string.
Common applications:
•
Mute
•
LED color and behavior
•
Loading presets
•
Adjusting levels
A complete list of command strings is available at:
pubs.shure.com/command-strings/MXA910.
Troubleshooting
Problem
Software lags in Google Chrome browser
Solution
Problem is browser-related. Turn off hardware acceleration
option in Chrome.
Shure Incorporated
52/59
Advertisement
Table of Contents
