Configuring Microphone Coverage For Mxa910 - Shure MXA910 Manual

Shure Incorporated
Software Workflow Basics
Think of each lobe as an individual microphone. If there were 8 microphones on the table, each one could be physically moved
according to seating arrangements, and would be plugged into a mixer with independent gain and channel controls. With the
Microflex Advance Ceiling Array Microphone, Designer delivers control over the physical coverage and audio channel settings,
with user presets to quickly switch between configurations. Each lobe is moved according to seating arrangements, with three
width settings to change the size of the coverage area. Independent mixer channels control the level and audio properties for
each lobe.
Each lobe is represented graphically and can be dragged into place. A corresponding mixer channel provides control
over audio settings for each lobe.

Configuring Microphone Coverage for MXA910

To configure the MXA910, follow these steps:
13/59