Toro Pro Force Debris Operator's Manual page 26

Hide thumbs Also See for Pro Force Debris:
Table of Contents

Advertisement

Note:
To reduce the amount of dust dislodged,
avoid knocking the filter against the air-filter
housing.
6.
Inspect the air-filter element.
Note:
Check the sealing end of the filter.
Important:
Replace a damaged filter.
If the air-filter element is clean, install the
filter element; refer to
(page
26).
If the air-filter element is damaged, replace
the filter element; refer to
Filter (page 26)
(page
26).
Replacing the Air Filter
1.
Clean the dirt ejection port located on the
air-filter cover.
2.
Remove the rubber outlet valve from the cover,
clean the cavity, and replace the outlet valve.
3.
Release the latches securing the air-filter cover
to the air-filter housing, and remove the cover
(Figure
25).
Figure 25
1. Air-filter housing
2. Air-filter element
4.
Gently slide the air-filter element
of the filter housing.
Note:
To reduce the amount of dust dislodged,
avoid knocking the filter against the air-filter
housing.
5.
Inspect the new filter for shipping damage.
Note:
Check the sealing end of the filter.
Important:
Do not install a damaged filter.
Installing the Air Filter
Replacing the Air
and
Installing the Air Filter
3. Air-filter cover
(Figure
25) out
Installing the Air Filter
Important:
To prevent engine damage, always
operate the engine with the complete air-cleaner
assembly installed.
Important:
Do not use a damaged element.
Note:
Cleaning of the used air-filter element is not
recommended due to the possibility of damage to the
filter media.
1.
Clean the dirt ejection port located on the
air-filter cover.
2.
Remove the rubber outlet valve from the cover,
clean the cavity, and replace the outlet valve.
3.
Insert the air-filter element into air-filter housing
(Figure
26).
Note:
Ensure that the filter is sealed properly
by applying pressure to the outer rim of the filter
when installing it. Do not press on the flexible
center of the filter.
1. Air-filter housing
2. Air-filter element
g002097
4.
Align the air-cleaner cover with the air-cleaner
housing, and secure the cover to the housing
with the latches
26
Figure 26
3. Air-filter cover
(Figure
26).
g002097

Advertisement

Table of Contents
loading

This manual is also suitable for:

4455244552lte

Table of Contents