Table of Contents
Advertisement
Installation
Copeland ZX condensing units are delivered with a holding charge of neutral gas. The condensing unit should be located in such a place
to prevent any dirt, plastic bag, leaves or papers from covering the condenser and its fins. The unit must be installed without restricting
the airflow. A clogged condenser will increase the condensing temperature, thus reduce the cooling capacity, and lead to a high-pressure
switch tripping. Clean the condenser fins on a regular basis.
Condensing Unit Handling
Transport and Storage
Move ZX/ZXB/ZXD/ZXL unit only with appropriate mechanical or handling equipment according to weight. Keep in the upright position.
Do not stack single boxes on top of each other without pallet in any case. Keep the packaging dry at all times.
Net Weight
ZX
Model
Weight (kg)
ZX020B0(E)
76
ZX025B0(E)
79
ZX030B0(E)
79
ZX040B0(E)
91
1
ZX050B0(E)
108
ZX060B0(E)
112
ZX075B0(E)
118
ZX076B0(E)
121
Notes:
100 kg for models under 60 Hz TF5/7 and 50 Hz PFJ
1
109 kg for models under 60 Hz TF7
2
3
117 kg for models under 60 Hz TF7
121 kg for models under 60 Hz TF7
4
127 kg for models under 60 Hz TF7
5
14
ZXB
Model
Weight (kg)
ZXB015BE
79
ZXB020BE
81
ZXB025BE
81
ZXB030BE
93
ZXB035BE
93
ZXB040BE
106
ZXB050BE
116
ZXB060BE
121
ZXD
Model
Weight (kg)
ZXD040B0(E)
104
2
ZXD050B0(E)
112
3
ZXD060B0(E)
114
4
ZXD075B0(E)
122
5
ZXL
Model
Weight (kg)
ZXL020B0(E)
79
ZXL025B0(E)
81
ZXL030B0(E)
81
ZXL035B0(E)
93
ZXL040B0(E)
93
ZXL050B0(E)
106
ZXL060B0(E)
116
ZXL075B0(E)
121
Advertisement
Table of Contents
