Installation; Condensing Unit Handling; Transport And Storage; Weights - Emerson Copeland EazyCool ZX Series Application Manuallines

3

Installation

WARNING
High pressure! Injury to skin and eyes possible! Be careful when opening
connections on a pressurized item.
IMPORTANT
The installation location must be selected in accordance with local workplace
safety regulations.
Copeland EazyCool ZX condensing units are delivered with a holding charge of neutral gas.
The condensing unit should be located in such a place to prevent any dirt, dust, plastic bag, leaves
or papers from covering the condenser and its fins.
The unit must be installed without restricting the airflow.
A clogged condenser will increase the condensing temperature, thus reduce the cooling capacity,
and lead to a high-pressure switch tripping. Clean the condenser fins on a regular basis.
3.1

Condensing unit handling

3.1.1 Transport and storage

WARNING
Risk of collapse! Personal injuries! Move units only with appropriate
mechanical or handling equipment according to weight. Keep in the upright
position. Respect stacking loads according to Figure 19. Do not stack
anything on top of the unit packaging. Keep the packaging dry at all times.
Respect the maximum number of identical packages which may be stacked on one
another, where "n" is the limiting number:
▪
Transport: n = 0
▪
Storage: n = 0

Figure 19: Maximum stacking loads for transport and storage

3.1.2 Weights

Condensing units
Medium temperature
Standard Weight
compressors
ZXMY-020E
ZXMY-030E
ZXMY-040E
ZXMY-050E
ZXMY-060E
ZXMY-075E
Table 27: Weights
AGL_Unit_ZX_A2L_E_Rev00
Digital
(kg) compressors
76
79 ZXDY-030E
91 ZXDY-040E
108 ZXDY-050E
112 ZXDY-060E
118 ZXDY-075E
Weight
(kg)
82
104
108
112
118
29