Humidity Settings - Johnson Controls S1-TTSCC01 User's Information Manual

Emergency Emergency
Heat Heat
Fan Fan Humidity Humidity
Dealer Dealer Tools Tools
Alert: Change Filter Alert: Change Filter
Fan Adjust
Function: Auto Manual
45%
xx%
Run fan 30 minutes Per Hour

HUMIDITY SETTINGS

In non-programmable mode, your Communicating Control humidity setting defaults to auto mode.
In programmable mode, the humidity setting defaults to schedule mode.
1. Press Menu.
NOTE: Or press the quick access Humidity icon on
the right side of your screen.
2. Press Humidity icon.
3. Select the Humidity mode.
a. Humidification – Select the Heat mode sym-
bol.
b. Dehumidification – Select the Cool mode
symbol.
4. Select Humidity function.
a. Auto – Automatically sets the humidity set-
point based on indoor temperature.
NOTE: Auto mode requires an outdoor sensor.
b. Manual – Manually set the humidity setpoint.
i. Select your desired indoor humidity
percentage level.
NOTE: If you start seeing condensation building up
on your windows, lower the humidity setpoint or
switch to auto mode.
c. Schedule – Follows program schedule humidity settings (See Page 9 for more information).
NOTE: Schedule option is only available in programmable modes.
5. Select check box to display humidity information on home screen.
6. Press OK when you are done.
Johnson Controls Unitary Products
All manuals and user guides at all-guides.com
2. Press Fan icon.
3. Select the Fan function.
Status Status Settings Settings
NOTE: Manual mode is not available for all sys-
tems.
Clean Clean Schedule
NOTE: The lower the speed the less electricity con-
Close Close
sumed.
Show Fan on
Home
Schedule
NOTE: Schedule option is only available in pro-
100%
grammable modes.
4. Select check box to display fan icon on home
5. Press OK when you are done.
Cancel
OK
a. Auto – runs only with equipment.
b. Manual – runs intermittently to circulate air.
i. Adjust the speed of your fan motor.
ii. Select the fan run time. Choices are 15,
30, and 45 minutes per hour or Always.
c. Schedule – follows program schedule fan
settings (see Page 9 for more information).
screen.
Humidity Adjust
22%
When Heating...
Mode:
Function: Auto
Humidity Adjust
22%
When Heating...
Mode:
Auto
Function:
35%
542937-UUM-B-0212
Show Humidity
Level on Home
Manual Schedule
Cancel OK
Show Humidity
Level on Home
Manual Schedule
45%
100%
Cancel OK
7