Proper Use Of The Product; Safety; Orientation - Siemens AXIOM Iconos R200 Operator's Manual

AXIOM Iconos R200
Accessories
Preliminary Remarks

Proper use of the product

This Operator Manual describes all the accessories provided by Siemens for the
ICONOS R200 system.
Proper use of the accessories presupposes that the user has read and under-
stood this Operator Manual in detail.
In addition, the user must be thoroughly familiar with the Operator Manual for the
basic system.
Finally, detailed knowledge of the applicable safety regulations for the medical
equipment being used is indispensable. These regulations are listed in the "Safe-
ty" Register of the respective system Operator Manual.
Explanation of "proper use" consists of illustrated descriptions of attaching, us-
ing and removing the accessory component.
Important information will be emphasized and enclosed in a text box.
Situations involving the use of accessories which could endanger the patient, the
operator or the equipment will be emphasized with a WARNING.

Safety

For reasons of safety for patients, operators and the equipment, only original
accessories manufactured and sold by Siemens or Siemens-approved accesso-
ries from another manufacturer may be used.
Siemens cannot assume any responsibility for accessories not approved by us.

Orientation

When using the accessories and to simplify the description, the following direc-
tional indications shall apply in this Operator Manual with regard to the working
position of the user:
❏ In front of the patient table looking in the direction of the X-ray tube
❏ left is the head end of the patient table
❏ right is the foot end of the patient table
❏ frontal means the longitudinal side of the patient table close to the operating
panel
❏ in back means the longitudinal side of the patient table away from the oper-
ating panel
AXD3-340.620.13.01.02 3
/ 54