Figure 17.
5.
Click Release Notes (see figure 17,
the latest update.
6.
Click the Download link on the right (
Installing Firmware Loader
Once Firmware Loader has been downloaded, run the .exe file from the save
1.
location. The Installation Wizard window opens.
2.
Follow the instructions on the Installation Wizard screens to install Firmware
Loader on the computer. The installation creates the necessary subfolders of
C:\ Program Files and the necessary groups. It places the appropriate files into the
correct group folders:
Folder — C:\Program Files\Extron\FWLoader
•
Downloading Firmware to a PC
1.
Power on a computer connected to the same network as the transmitter or receiver.
2.
On the Extron website, mouse over the Download tab in the menu bar along the top of
the page (see figure 18,
Figure 18.
3.
Click Firmware in the drop‑down menu (
The Firmware page opens (see
Firmware Loader Software
) to see the issues that have been addressed by
1
). Note where the file is saved.
2
).
1
Locate Firmware for DTP2 211 Transmitter or Receiver
figure 19
).
2
on page 26).
DTP2 T/R 211 • Remote Control
25