Weider 8525 User Manual page 14

26. Press a 1 1/2" Square Inner Cap (32) into the
Seat Frame (36).
Insert the 1/4" x 2" Carriage Bolt (38) into the
center hole in the Seat Plate (37). Attach the Seat
Plate to the Seat (13) with two 1/4" x 3/4" Screws
(18).
Insert the 1/4" x 2" Carriage Bolt (38) into the indi-
cated hole in the Seat Frame (36). Tighten a 1/4"
Nylon Locknut (2) with a 1/4" Flat Washer (10)
onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat
Frame (36) with a 1/4" Flat Washer (10) and the
1/4" x 2" Screw (24).
27. Press a 1 1/2" Square Inner Cap (32) into the Leg
Lever (29).
Lubricate the 5/16" x 2 3/4" Bolt (11). Attach the
Leg Lever (29) to the Seat Frame (36) with the
Bolt and a 5/16" Nylon Locknut (3). Do not over-
tighten the Nylon Locknut; the Leg Lever
must be able to pivot freely.
Insert two 3/8" x 2" Eyebolts (35) into the Leg
Lever (29) from the directions shown. Tighten a
3/8" Nylon Locknut (73) and a 3/8" Flat Washer
(9) onto each Eyebolt.
28. Rest the Seat Frame (36) on the indicated pin in
the Front Upright (42). Attach the Seat Frame to
the Front Upright with a 5/16" x 2 3/4" Carriage
Bolt (14) and the Seat Knob (40).
All manuals and user guides at all-guides.com
14
26
38
37
36
10
24
27
2
Lubricate
11
35
73
28
40
14
Pin
42
13
32
18
2
36
3
29
9
73
9
32
35
36