Paper Settings - Sharp AR-C260P Operation Manual

SELECTING PRINTING FUNCTIONS

Paper settings

The following screen appears when the Paper tab is selected. The settings and buttons in this screen are explained
below.
Paper Size
Select the size of paper to be printed on.
Click one of the paper sizes that appear in the list.
Default setting: A4
[Custom]
A custom paper size can also be set.
Click this button to set the custom paper size
(only one custom paper size can be set).
When printing with a custom paper size, the
paper must be loaded horizontally.
Correct
Horizontal loading
Fit To Paper Size
This field is used for the Fit to Page function. This
function automatically enlarges or reduces the
printed image to match the paper being used.
Enlargement or reduction takes place with the
image centred on the page.
To use this function, select the "Fit to Page"
checkbox and then select the size of paper to be
used.
NOTE
Printing normally takes place using the paper size
set in the application, regardless of the paper size
selected in the printer driver. When the paper size is
not specified in the application, the paper size
setting in the printer driver is used.
2-8
Downloaded from: http://www.usersmanualguide.com/
Wrong
Vertical loading
[Fit To Page]
When this checkbox is selected, the print image
corresponding to the paper size selected in
[Paper Size] is automatically reduced or enlarged
to fit the paper selected in [Fit To Paper Size].
Default setting: Not selected
Image Orientation
Set the orientation of the document.
Select [Portrait] or [Landscape].
Default setting: Portrait
[Rotate 180 degrees]
Rotate the image 180° before printing. This
function rotates the image to enable correct
printing on envelopes and other paper with flaps.
Default setting: Not selected