Sharp AR-C260P Operation Manual page 18

SELECTING PRINTING FUNCTIONS Frequently used settings (continued)
Finishing
Configure settings for staple or punch finishing.
[Binding Edge]
When automatic two-sided printing is performed, the
[Binding Edge] setting is used to determine how the
left, right and top edges of the front and back sides
are positioned. The relation between the document
and each of the settings is as follows:
Default setting: Left
[Left]
Left binding
Binding edge
[Staple]
[None] ........... Do not staple.
[1 Staple]....... Staple in one place.
[2 Staples] ..... Staple in two places.
When [1 Staple] or [2 Staples] is selected, the
[Collate] setting is automatically activated.
Default setting: None
■ ■ ■ ■ Saddle stitch function
The saddle stitch finisher can automatically place
two staples for centreline binding of prints and
fold them along the centreline.
<Example>
6
4
2
2-4
Downloaded from: http://www.usersmanualguide.com/
Original image
[Right] [Top]
Rignt binding Top binding
Binding edge
Binding edge
7
9
1 1
■ ■ ■ ■ Staple sort mode
Collated sets of prints will be stapled and delivered to the
offset tray. When saddle stitching is selected, the prints
will be stapled at the centre and delivered to the saddle
stitch tray. The stapling positions, orientation, paper size
for stapling, and stapling capacity are shown below.
Stapling positions
Top left
corner of
printouts
Lower left
corner
of printouts
Centre left
two
positions of
printouts
Saddle
stitch on
centrefold
line.
Top left
corner of
printouts
Lower left
corner
of printouts
Centre left
two positions
of printouts
Saddle
stitch on
centrefold
line.
For a detailed explanation of stapling functions
(including saddle stitch) using the saddle stitch finisher,
see "SADDLE STITCH FINISHER"
Available paper sizes:
A4, B5 and 8-1/2" x 11"
Stapling capacity:
For each size, up to 30
sheets can be stapled
Same as above
Same as above
Paper in the portrait
direction cannot be
saddle stitched.
Available paper sizes: A3, B4,
A4R, 11" x 17", 8-1/2" x 14",
8-1/2" x 13" and 8-1/2" x 11" R
Stapling capacity: Up to 30
sheets of A4R or 8-1/2" x 11"R
paper can be stapled, up to 25
sheets of other paper sizes
Same as above
Same as above
Available paper sizes:
A3, B4, A4R, 11" x 17"
and 8-1/2" x 11"R
Stapling capacity: For
each size, up to 10
sheets can be stapled
(page 4-7).