Unauthorized Modifications; Leaving The Operator Seat - Komatsu Galeo PC14R-2 Operation & Maintenance Manual

GENERAL PRECAUTIONS

2.2.4 UNAUTHORIZED MODIFICATIONS

Any modification made without the authorization of Komatsu can involve hazards.
q
Before making a modification, consult your Komatsu Dealer. Komatsu declines any responsibility for injury or
q
damage caused by unauthorized modifications.

2.2.5 LEAVING THE OPERATOR SEAT

When leaving the operator seat, even if temporarily, make sure
q
that the machine is in a safe position. (See "2.4.14 PARKING
THE MACHINE").
Before leaving the operator seat, carry out the following
q
operations in the sequence indicated below:
1 - Lower the equipment to the ground.
2 - Engage the safety locks of the boom swing, optional
equipment and turret swing controls.
3 - Lock the equipment control by shifting the safety lever (1) to
the "locked" position (L).
4 - Stop the engine. (See "3.3.4 STOPPING THE ENGINE").
5 - If you have to go so far away that you will not be able to see
the machine, extract the ignition key.
26
F
CAB
L
9JA05440
RKA10550
RKA16340