Table of Contents
Advertisement
SAFETY, NOISE AND VIBRATION PLATES
2.1 SAFETY, NOISE AND VIBRATION PLATES
2.1.1 POSITION OF THE SAFETY PLATES
The safety plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or
q
grease, it is necessary to clean them with a solution made of water and detergent.
Do not use fuel, petrol or solvents.
If the plates are damaged, ask for new ones to Komatsu or to your Komatsu Dealer.
q
In case of replacement of a component provided with a safety plate, make sure that such a plate is applied also
q
to the new part.
The machine can be provided with other plates in addition to those indicated below; keep also to the instructions
q
given in the additional plates, in any case.
18
RKA16560
Advertisement
Table of Contents
