Getting On And Off The Machine - Komatsu Galeo PC14R-2 Operation & Maintenance Manual

Hydraulic excavator
Table of Contents

Advertisement

2.2.6 GETTING ON AND OFF THE MACHINE

Do not jump on or off the machine, neither when it is at rest nor
q
when it is moving.
When getting on or off the machine, always use the handles
q
and the tracks; get on and off the machine very carefully.
Do not hold or rest on the control levers.
q
Both when getting on and when getting off the machine, always
q
maintain three points of contact (holding or resting points), in
order to avoid losing your balance and falling down.
Tighten the handle screws if they are loose, and clean the
q
handles and tracks if they are dirty with oil or grease.
Carefully clean the cab floor if it is dirty with oil, grease, mud or
rubble.
GENERAL PRECAUTIONS
CANOPY
RWA18670
27

Advertisement

Table of Contents
loading

Table of Contents