9 - 4
C
A
Fig. 7
Replacing the collimator
Equipment required: Rope
•
Switch off the unit and disconnect the power plug.
•
Turn the single tank so that the collimator is facing upwards (Fig. 7).
•
Secure the arm and the single tank with a rope (Fig. 7).
•
Remove covers "A" and "B".
•
Remove collimator cover "C".
MOBILETT Plus/ Plus E
Replacement and repairs on the collimator
B
SPR8-215.898.02
Rev. 01
Page 4 of 8
01.02
SPS-UD
9
Siemens-Elema AB
Solna, Sweden