Ice-O-Matic ELEVATION Series Installation Manual And Owner's Manual page 11

ELEVATION SERIES
Please note: air-cooled units require 6"(152mm) for air intake and exhaust.
A. Ice maker potable water in,
3/8" FPT.
B. Ice maker water out,
3/4" FPT.
A. Ice maker potable water in,
3/8" FPT.
B. Ice maker water out,
3/4" FPT.
C. Hole for electrical connections,
7/8".
D. Electrical junction box,
7/8" (remote).
Electrical and Plumbing Requirements
48" CIM SERIES Common Connections
(CIM**4* A)
Air Cooled
(CIM**4* W/R)
Water/Remote Cooled
ELECTRICAL AND PLUMBING REQUIREMENTS
C. Hole for electrical connections,
7/8".
D. Electrical junction box,
7/8".
E. Condenser water out, 3/4" FPT (water only).
Discharge line, 1/2" male quick connect
coupling for pre-charged line set (remote only).
F. Condenser water in,
3/8" FPT (water only).
G. Liquid Line,
3/8" male quick connect coupling for
pre-charged line set (remote only).
10